According to the supplier, the version from the first picture is supplied.

There are different models of the WireView. The one you linked has two 12VHPWR connectors (male and female). As for the 4090 cablefires; just make sure it's properly seated into the GPU and the cables are properly seated into the WireView. What causes the cards to draw too much power is when the cables aren't fully connected. Ideally the 8pin/12VHPWR cable(s) shouldn't be touching the sidepanel of your case at all. If you notice the sidepanel squishing against those GPU cables they might come lose to a point where as described, the card will draw too much power - more than the cables are rated for (600W), causing the connectors on the GPU to melt. If you decide not to get the WireView, get at least an angle adapter (CableMod for example).

Please note, there are prices from different suppliers for all variants. But also our prices are not exactly the same for all versions. This is often due to the fact that the purchase quantity and purchase prices are not the same. In general, the prices can also change again and again. If you are interested, you can find more information on the following link: https://www.digitec.ch/de... You can find the "1x 12VHPWR - Reverse" version on the following link: Thermal Grizzly WireView GPU, 1x 12VHPWR - Reverse