Best products in the Microphone accessories category
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Shure SH-BROADCAST1
Designed to Hold Your Preferred SHURE or Other-Brand Vocal Mic for a Wide Variety of Applications: Broadcasts, Podcasts, Live Streams, & Many More
Clamps Easilyto Any Desk, Table or Similar-Sized Surface up to 2.17” (55mm)-Thick
Threaded Extension Adapter Provides XLR Cable Clearance & Compatibility with Shure SM7B, MV7, & Similar Models
Quietly Rotates Full 360-Degrees & Provides up to 32.25” (940mm) of Mic Arm Extension
Convenient Cable Channel with Secure Clips for XLR or USB Mic Cable Organization
Fits Both US & Euro Mic Clips.
2. RØDE Interview GO Hand Holder
By inserting the transmitter module of the Wireless GO radio link into the appropriate slot at the top of the Interview GO and fitting it with the included foamwindscreen, you get a stylish wireless reporter microphone with excellent voice transmission. The range of the Wireless GO system is more than adequate at 70 metres.
3. RØDE SC15 USB-C auf Lightning-Kabel umgestellt
USB-C to Lightning Cable
A high quality, 30 cm long and well shielded USB-C to Lightning cable. The SC15 allows you to digitally connect the VideoMic NTG to an iPhone,elegantly bypassing the iPhone's preamp/converter section for the best possible audio quality. In addition, the VideoMic NTG's 3.5mm jack can then be used as an adjustable headphone output. The SC15 has an integrated element with which it can be perfectly attached to the cable management of the VideoMic NTG, thus eliminating annoying slagging.Featureshigh-quality ribbon cableUSB-C to Lightningfor digital connection of the VideoMic NTG to an iPhonealso suitable for other Apple devices with Lightning connectorcompatible with cable management of the VideoMic NTG.
4. RØDE Wireless Go II Charging Case
Stylish, robust, 10 cm wide zipped case covered in grained leatherette for the three modules of the RØDE Wireless GO II wireless microphone system (2x transmitterTX and 1x receiver RX).
The battery capacity is 4500 mAh, which allows the modules to be fully charged twice. On the back of the case is the USB-C port and next to it a charging status LED with test button.
Features
- Robust zipped case with imitation leather cover
- for simultaneous charging of the three Wireless GO II modules
- Slots for 2x transmitter (TX) and 1x receiver (RX)
- Battery capacity: 4,200 mAh
- Allows two complete charges of all three modules
- Input: USB-C, 5V DC/3A
- Charging status LED with test button
- Dimensions: 98 x 71 x 78 mm
- Weight: 185 g.
5. DJI Mic 2 Charging Case
Note: This product is only the charging cradle and not the entire microphone system.
Professional sound in pocket size
Capture authentic sounds with the improved,ready-to-use DJI Mic 2. With its premium functions, including high-quality audio recording, intelligent noise cancellation and support for internal 32-bit float recording, the DJI Mic 2 lets you create balanced and detailed audio content that's perfect for vlogs, interviews, livestreams and more.
-High quality audio recording
-Everything you need, ready to go
-Internal recording (14 hours) and internal 32-bit float recording
-Intelligent noise cancellation, crystal clear voices
-250 m range
-18 hours battery life
The DJI Mic 2 features a sleek, improved design that takes its look to the next level. A new charging cradle made of high-quality metal provides a minimalist appearance, and the new locking latch safely and reliably protects against damage from accidental drops, ensuring safety during use.
Capture brilliant audio content with the DJI Mic 2's omnidirectional audio recording, specially optimised for voice recording. Handle multi-person scenarios for vlogs, interviews or various other recording needs with ease. The new intelligent noise cancellation effectively reduces ambient noise for clean, uninterrupted conversations, even in busy urban areas or crowded rooms. With the windscreen, you can also effectively reduce wind noise in windy situations or during fast movements.
Save audio files with backup
To protect against unexpected audio level peaks, a second track can be recorded alongside the main audio track at -6 dB. Even in very complex, highly chaotic environments such as a rock concert, the DJI Mic 2 delivers balanced results with remarkable ease. The receiver connects effortlessly to your camera via the 3.5 mm TRS cable and synchronises its charging status with that of the camera. This ensures a seamlessly synchronised audio recording experience without technical distractions.
Unrivalled compatibility
The DJI Mic 2 offers a variety of compatibility options from USB-C and Lightning digital outputs to an analogue 3.5mm TRS output. Whether you're working with cameras, smartphones, computers or tablets, DJI Mic 2 is ready for integration. The stereo function is available for iPhone and most Android mobile devices, allowing playback on a smartphone without having to disconnect the receiver. The receiver also features a dedicated 3.5mm TRS monitoring port, allowing real-time audio monitoring through your choice of 3.5mm headphones.
Effortless touchscreen operation
A 1.1-inch OLED touchscreen combined with a precision wheel provides quick access to important information such as volume and battery level and also allows precise adjustments to parameters such as gain, volume, brightness and more. Achieve the optimal audio setup with unrivalled ease.
Portable storage
The redesigned DJI Mic 2 carrying case features a compact and slim design with a convenient wrist strap for easy transport. It can easily hold all the components included in the DJI Mic 2 combo (2 transmitters + 1 receiver + charging cradle). The practical clamshell design ensures that all accessories are neatly stowed away and can be accessed quickly and easily.
6. Elgato shock mount
Wave Shock Mount perfectly protects your wave microphone from vibrations caused by use or shocks that cause low-frequency noise. The sturdy steel frame with reinforcedelastic suspension absorbs shocks as well as possible, so you can record crystal-clear audio without annoying rumble. And to keep you flexible, the included adapter allows you to connect to most popular microphone arms. Wave Shock Mount is specifically designed to isolate the Wave:1 and Wave:3 microphones from vibrations transmitted through mounts and surrounding surfaces, so you can work with crystal-clear audio with high concentration.
7. RØDE Micro Boompole Pro
Modular boom consisting of three parts with a maximum length of 2.2m.
8. Walimex pro pro McPipe handheld stand for microphones 3m
Walimex pro Tonangel MicPipe Handheld Tripod for Micro 3mThe boom is suitable for all video productions where an external microphone is used. With a weight of 0,7kgthe boom is very light and can be kept stable for a longer time. It can be pointed at the speaker from above without seeing the microphone in the picture. The sound assistant can easily operate the arm which can be continuously extended up to 300cm. The neoprene protection prevents the operator's noise from being transmitted and the tang can be held comfortably. The cables are laid directly through the fishing rod and are therefore safely stowed away. Of course, mounting on a tripod is also possible via a separately available clamp. For transport, the fishing rod can be retracted to a compact 80cm -sound fishing rod for reportages, interviews, set-shootings etc. -extension for easy improvement of sound recordings -easy control and balance due to low weight -moss rubber coating on the handle -cables are routed directly through the fishing rod -connection for microphones via 3/8 inch thread -max. length 3 metersTechnical description: -Min. length 80cm -Max. length 300cm -weight 0.5 kg Length 300cm -Weight 0,7kg -Material Neoprene, Aluminium.
9. RØDE SC16 USB-C cable
The SC16 is a high quality USB-C to USB-C cable for connecting RØDE microphones with a USB-C output to USB-C compatible devices. With a length of 300mm, the cableis ultra-flexible, allowing you to easily attach it to your devices. It also features a built-in cable grip that is compatible with the shock-absorbing VideoMic NTG cable management system.
It is particularly suitable for connecting the VideoMic NTG to USB-C mobile devices, but can also be used with any RØDE device with a USB-C output, including the NT-USB Mini, Wireless GO and RØDECaster Pro.
10. Elgato Wave Extension Rods
The two rods have a thread through which they are screwed together and to the stand or U-frame can be. Made of sturdy steel and finished with black powder coating,they fit they are perfect for your premium Wave:1 or Wave:3 microphone.
Microphone accessories
–10%
only 3 of 3 remaining on sale
6,18 EUR was 6,87 EUR
Elgato Wave Extension Rods