ASUS Rog Strix Z370-F
LGA 1151, Intel Z370, ATX
Question about ASUS Rog Strix Z370-F
Hi, I would like to expand from 2 to 4 ram modules and have therefore bought 2 more hyperX 2666 modules - now when I install them and use all 4 slots, the PC only boots via BIOS and the DRAM lamp lights up yellow on the motherboard because the POST fails - what do I have to change in the BIOS settings so that it works with all 4? if I only use 2 modules in all combinations, then it works with the boot. I have also used A1, B1 and A2, B2 as a slot combo and it works - so neither RAM nor motherboard are broken...
What RAM profile have you loaded? It may be called OC Profile or similar.
If you select XMP (faster) or SPD (slower, but should be stable in any case), it should work.
4 bars draw more current than 2, probably the DRAM voltage is too low.
Of course, it could also be that the bars are not compatible. Try one new and one old one. If it works, it's the settings. If not, they are incompatible with each other.
If you select XMP (faster) or SPD (slower, but should be stable in any case), it should work.
4 bars draw more current than 2, probably the DRAM voltage is too low.
Of course, it could also be that the bars are not compatible. Try one new and one old one. If it works, it's the settings. If not, they are incompatible with each other.