Round, decorative LED surface-mounted light for wall and ceiling installation with protection class IP65. The wall light harmonizes with other fixtures used in the project through its optical and technical design features. It can also be used comprehensively within the building. Surface-mounted lights for ceiling and wall installation. With Lambertian light intensity distribution. The LED system forms a fixed unit with the light cover and can be replaced. LED system with adjustable light output and adjustable light color via DIP switch. Rated luminous flux 2050 lm - 2100 lm, rated power 20.00 W - 0.00 W, maximum luminous efficacy 105 lm/W. Selectable color temperature: 3000 / 4000 K, general color rendering index (CRI) Ra > 85. Color point tolerance (initial MacAdam) = 4 SDCM. Average rated lifetime L80(tq 25 °C) = 50,000 h. The light source is replaceable according to eco-design requirements. Housing made of aluminum die-cast. Cover made of highly impact-resistant PMMA, opal. Surface coated white (RAL 9010). Light diameter 350 mm, height 83 mm. Protection class (EN 61140): I, protection rating (DIN EN 60529): IP65, protection rating for lamp compartment: IP65, impact resistance according to IEC 62262: IK10. Weight: 3.1 kg. With a 5-pole terminal block up to 2.5 mm² for mains connection and network forwarding. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The luminaire is suitable for operation on a 230V DC power supply. The control gear is replaceable according to eco-design requirements. The LED system with control gear is suitable for operation on DC networks. Surge voltage resistance Differential Mode / Common Mode: 1 kV / 2 kV. The product meets the fundamental requirements of applicable EU directives and the Product Safety Act and bears the CE mark.