Round, decorative LED surface-mounted light for wall and ceiling installation with an IP65 protection rating. The wall light harmonizes with other fixtures that may be used in the project through its optical and technical design features. It comes with an integrated high-frequency motion sensor. The detection area has an elliptical shape, with a detection range of up to 12 meters in length and up to 8 meters in width. It can also be used comprehensively within the building. Surface-mounted lights for ceiling and wall installation. With Lambertian light intensity distribution. The LED system forms a fixed unit with the light cover and can be replaced. LED system with adjustable luminous flux and adjustable light color via DIP switch. Rated luminous flux of 900 lm - 1450 lm, rated power of 10.00 W - 14.00 W, maximum luminous efficacy of 104 lm/W. Selectable color temperature: 3000 / 4000 K, general color rendering index (CRI) Ra > 85. Color tolerance (initial MacAdam) = 3 SDCM. Average rated lifespan L80(tq 25 °C) = 50,000 h. The light source is replaceable according to ecodesign requirements. Housing made of aluminum die-cast. Cover made of highly impact-resistant PMMA, opal. Surface coated in white (RAL 9010). Light diameter 265 mm, height 75 mm. Protection class (EN 61140): I, protection rating (DIN EN 60529): IP65, protection rating for the lamp compartment: IP65, impact resistance grade according to IEC 62262: IK10. Weight: 1.8 kg. With a 3-pole terminal block for network connection and network forwarding, suitable for up to 2.5 mm². Equipped with an electronic control gear, switchable. The control gear is replaceable according to ecodesign requirements. Surge voltage withstand capability Differential Mode / Common Mode: 1 kV / 2 kV. The product meets the basic requirements of applicable EU directives and the Product Safety Act and bears the CE marking.