Circular saw for cutting wood 160x30mm, 24 teeth Widium 42162-30. The saw is made of thermally improved carbon steel 50# (metal disc) and tungsten carbide YG8 (cutting blade) with a blade hardness of 85 HRc (+/-2st). GS blade geometry with a 10-degree angle. A metal disc cut with laser technology, with properly selected thickness, ensures the rigidity of the cutting disc and eliminates stress on the disc even when working under heavy load and high temperatures. The special HM sintered carbide guarantees long life of the teeth and enables repeated sharpening. The correctly selected geometry of the blade and the shape of the GS10 cutting plate (alternately chamfered) ensure optimum processing quality when cross-cutting wood. A larger number of teeth for a given diameter of the saw blade ensures a smooth surface of the material to be cut, especially dry wood. Saws can also be used for rip cutting, but it is recommended to use cut-off wheels with fewer teeth above a certain diameter of the saw, which significantly increases the cutting speed of the materials to be cut. Intended for industrial use with all types of power tools, for cutting soft and hard wood, other wood-based materials, fibreboard, and plasterboard. Maximum speed 7100 rpm. Note: To improve the cutting quality of the material being cut and to extend the life of the cut-off wheel, it is recommended that the cut-off wheel protrudes 1/3 of its height above its thickness when cutting. The saws are not intended for cutting concrete, bricks, terracotta and ceramics, Plexiglas and other plastics, ferrous and non-ferrous metals, and wooden materials in combination with other materials. Technical data: Inner hole: fi 30.0mm. Inner hole reductions: 30.0x16.0mm, 30.0x20.0mm, 30.0x22.2mm, 30.0x25.4mm. Diameter: fi 160mm. Number of teeth: 24.