Circular saw for cutting wood, 200 x 30 mm, 24 teeth, Widium 42202. The saw is made of thermally improved carbon steel 50# (metal disc) and tungsten carbide YG8 (cutting blade) with a blade hardness of 85 HRc (+/-2). It features GS blade geometry with a 10-degree angle. The metal disc is cut with laser technology, and its properly selected thickness ensures the rigidity of the cutting disc, eliminating tension even under heavy load and high temperatures. The special HM sintered carbide guarantees long life for the teeth and allows for repeated sharpening. The correctly selected geometry of the blade and the shape of the GS10 cutting plate (alternately chamfered) ensure optimum processing quality when cross-cutting wood. A larger number of teeth for a given diameter of the saw blade ensures a smooth surface of the material being cut, especially dry wood. Saws can also be used for rip cutting, but it is recommended to use cut-off wheels with fewer teeth above a certain diameter of the saw, which significantly increases the cutting speed of the materials. Intended for industrial use with all types of power tools, for cutting soft and hard wood, other wood-based materials, fibreboard, and plasterboard. Maximum speed is 5700 rpm. Note: To improve the cutting quality and prolong the life of the cut-off wheel, it is recommended that the cut-off wheel protrudes 1/3 of its height above the thickness when cutting materials. The saws are not intended for cutting concrete, bricks, terracotta, ceramics, Plexiglas, other plastics, ferrous and non-ferrous metals, and wooden materials in combination with other materials. Technical data: Inner hole: fi 30.0 mm; Inner hole reductions: 30.0 x 16.0 mm, 30.0 x 20.0 mm, 30.0 x 22.2 mm, 30.0 x 25.4 mm; Diameter: fi 200 mm; Number of teeth: 24.