Devi Heating Mat for Concrete DEVIsnow 300#0627

Manufacturer: Devi
Description: Heating mat for concrete 400V 12.0 sqm, 3565 W
Type: DEVIsnow 300#0627
With carrier mat: yes
Heating conductor fixation: glued
Self-adhesive: no
Connection power: 3565 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Number of cold conductors: 1
Length of cold conductor: 30000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 12 m²
Length: 16000 mm
Width: 750 mm
Thickness: 7.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The Devi Heating Mat for Concrete DEVIsnow 300#0627 is a ready-to-install heating mat with a connection cable, suitable for installation in reinforced concrete, screed, or sand beds. It features an additional protective sheath for use with RCD protection circuits. This heating mat system is particularly suitable for installation in angular and/or large areas, as the return of the second connection is not required.

Includes factory-installed waterproof connectors and a 30 m long cold conductor, which can be installed according to the installation instructions. It is important to measure the insulation and total resistances. The heating cable complies with IEC 60800, has a voltage of 400 V, a nominal maximum temperature of 80 °C, a specific heating output of 300 W/m², a resistance tolerance of +10% / -5%, a minimum installation temperature of 5 °C, a minimum bending radius of 5 x dA, and a protection class of IP X7. The area is 12.0 m² and the power is 3625 W.