EUR375,–
Blaupunkt Portable charger
Type 2, 11 kW, 16 A, CEE16 red
Questions about Blaupunkt Portable charger
What would you like to know?
0 questions and answers
Helpful answer
We have been using this device for approx. 4 weeks for a Peugeot E208. Works perfectly on a wall socket CEE 16A 5L 6h 400V IP44. It's certainly the best choice for tenants.
Helpful answer
No, because it's a portable charger that can be plugged into any European 16A EEC socket.
Helpful answer
Hello, If the campsite is equipped with a 400 Volt CEE 16 Amp socket, no problem, as it's a European socket. Best regards
Galaxus
3 weeks ago
To obtain power in excess of 3.6 kW with a three-phase 16 A × 3 phase installation, you need a three-phase charging point capable of delivering 11 kW, i.e. 16 A on each phase (16 A × 230 V × 3 phases = 11 kW). This requires the electrical installation to be three-phase and the charging point to be designed for this power. So, with a 16 A three-phase connection, you can charge up to 11 kW, which is more than 3.6 kW single-phase.
Automatically generated from the .
Hello, so you're at 3.6 kW, not kWh, as this is the charging power. To change the amperage, and therefore the power, you need to hold down the button, then press it several times until the correct amperage appears on the screen. Finally, and I admit this is rather annoying, you have to hold down the button to confirm and retain your choice.
The total length of the cable is 8 m. The part that connects to the vehicle is approximately 6 m long.
Galaxus
3 weeks ago
Helpful answer
The secondary cable is 8 metres long. This cable length offers maximum flexibility when charging and parking the electric car.
Automatically generated from the .
Please contact us if you suspect a manufacturing fault: https://www.galaxus.ch/help
Helpful answer
Unfortunately not. This function is not available.
Helpful answer
According to our information, the charging power of 11 kW remains the same as long as the extension cable supports the same circuit and the same power as the original cable. However, the use of extension cables can lead to a slight loss of power.
Helpful answer
Hello, the appliance has a hole for fixing to the wall with a simple screw. There are also separate fixings (with padlocks) for the plug. Personally, that's what I did to fix my charger.
Helpful answer
I installed this instead of the Wallbox, I never unplugged the T25, it works perfectly.
Helpful answer
Hello there. Have you set the charger to maximum? Keep your finger on the amps button and select 16A. Otherwise, are you sure that your wall socket is rated for this power? Best regards. Moreno
Galaxus
10 months ago
Helpful answer
The Blaupunkt portable charger (type 2, 11 kW, 16 A, CEE16 red) with the product ID P3PM2T2 has a protection rating of IP65, which means that it is protected against dust and water jets. You can therefore use it outside in the rain, but it should not be submerged in water. Regarding drive-over protection: The charger has no specific mention of drive-over protection in the information provided. However, it is waterproof and dustproof according to the IP65 protection class, which makes it robust against external influences, but it is not explicitly described as drive-over protection.
Automatically generated from the .Galaxus
10 months ago
Helpful answer
The Blaupunkt portable charger (type 2, 11 kW, 16 A, CEE16 red) with the product ID P3PM2T2 has a protection class of IP65. - Water resistance: The IP65 certification means that the device is protected against dust and is resistant to water jets from all directions. It can therefore be used outdoors in the rain, but it should not be submerged in water or placed directly in heavy jets of rain. - Drive-over protection: There is no specific information about drive-over protection for this device. However, the IP65 certification ensures a certain robustness against environmental conditions, but it is not explicitly designed for drive-over protection. It is always advisable to place the device in a protected location to ensure optimum service life.
Automatically generated from the .Galaxus
11 months ago
The Blaupunkt portable charger (type 2, 11 kW, 16 A, CEE16 red) with the product ID P3PM2T2 does not come with integrated DC monitoring protection. It is therefore necessary to install a separate RCD type B switch to ensure the necessary safety.
Automatically generated from the .
Helpful answer
I've been using this charger for over a year without any regrets. It works perfectly and has never switched off after 30' without being asked to do so. I usually programme it in the evening at off-peak times to start at around 9pm and switch it off in the morning at 6.30am, but by then my vehicle is 100% charged anyway... I'd definitely recommend it
Good evening, with my KIA EV6 I had to set the battery intake higher or lower. I guess your Hyundai also allows you to do this.
Helpful answer
Type 2 is designed for 3 phases. For our Citroen eC4, the adapter works perfectly with 11kW. Why don't you just get yourself a 220V adapter? The standby current is certainly very low, but I haven't measured it.
Helpful answer
No, the wall socket is a 5-pin 400V 16A red CEE type socket, European standard, not T25 type, which is a Swiss standard.
30 of 37 questions