Features
• One for all: Building authority approval for cracked and uncracked concrete, hollow and solid masonry, as well as retrofitting reinforcement connections
• LEED and emissions tested: for ecological and healthy living
• Compatible with standard threaded rods
• Earthquake tested C1
• Usable even at extremely low temperatures (down to -10 °C)
• Usable in wet and water-filled drill holes
• Low axial and edge distances due to pressure-free anchoring
• Secure attachment of heavy loads up to 13.3 tons
• Can also be applied overhead
• Reusable cartridge by changing the static mixer
• Variable anchoring depth - saves time and material

Description & Application Area
• Liquix Pro 1 is a styrene-free vinylester composite mortar, available in various cartridge types and sizes with the Liquix Mix static mixer
• For approved relevant fixings in cracked and uncracked concrete and masonry
• Approved in conjunction with standard threaded rods or Stix threaded rods

Processing & Installation
• In hollow masonry, work with a sieve sleeve
• Clean the drill hole
• Screw the static mixer firmly onto the cartridge
• Mark the set depth on the anchor rod that deviates from the standard
• Discard the first approx. 10 cm of the composite mortar and do not use it for the fastening
• Fill the cleaned drill hole about 2/3 full from the bottom, or completely fill with composite mortar if using a sieve sleeve
• Insert the anchor rod with slight twisting movements to the specified set depth
• Observe the torque and curing times of the respective valid approvals
• The mortar can be used in dry or damp concrete as well as in water-filled drill holes
• For processing coaxial, peeler, and hose film cartridges, use the Liquix Blaster and Liquix Blaster Pro dispensing guns; for side-by-side cartridges, use the Liquix Blaster Plus dispensing gun.