Phanteks RGB LED strip
RGB
Questions about Phanteks RGB LED strip
What would you like to know?
0 questions and answers
This allows several such strips to be connected in series. If only one (1) strip is used, leave the other plug open.
Helpful answer
Oui: http://www.phanteks.com/PH-LEDKT.html
These strips are an extension of existing LED chains. They cannot be connected directly.
Helpful answer
The combo set has 2 strips 400mm each and extension cable. This item has only one strip. You can see it in the pictures
Additional info: 4 RGB LED strips are connected to each other, with the Phanteks RGB LED adapter connected directly to the mainboard. (Nothing worked with the Phanteks LED controller, or I couldn't connect it at all, it was also described in the instructions that you should remove the one in the Phanteks case and connect it directly to the mainboard with the adapter. The control system etc. works perfectly, except that the LEDs are not red.
Yes, that shouldn't really be a problem.
Instead of one LED strip, there are two. Also known as quantity discount. :)
Helpful answer
the product page says that standard rgb and rgbw strips are supported, so this should work.
I use it with the Asus Strix X99. It doesn't fit directly on the mainboard because the sockets are too big, but there is an extension cable in the MB where I soldered it on because it just fit and connected it to the MB that way. Note that the MB is not in RGB connection sequence but in GRB or similar and the colour then lights up green if you set it to red in the Aura software, for example, but that didn't bother me, otherwise you can also adjust it by swapping a cable with another one. I hope I could help.
13 of 13 questions