The Ugreen CM403 can be used to create a Bluetooth connection with your Apple AirPods Pro 4 by plugging it into the headphone jack of the Matrix E50 elliptical trainer. However, the trainer must have a compatible audio output for the CM403 to function as a transmitter. The CM403 supports AAC and SBC codecs, which are commonly compatible with most Bluetooth devices, including AirPods. Ensure the trainer's console does not interfere with the Bluetooth signal from the CM403.
Yes, a CD player in the car can be connected via Bluetooth by using a Bluetooth adapter. Such an adapter can convert the analogue audio output of the CD player into a Bluetooth signal, which can then be sent to a Bluetooth-enabled device. Alternatively, you can also use a CD player with integrated Bluetooth, if available.
Yes, you can connect two Bluetooth headphones to this adapter at the same time. In transmit mode, the device can be connected to two Bluetooth receivers to output audio simultaneously.
Yes, the sound from a TV without Bluetooth can be transmitted to a Phonak Audeo hearing aid with Bluetooth using this adapter. The adapter acts as a transmitter and makes it possible to send the sound from a TV to the hearing aid via Bluetooth. Make sure that the hearing aid uses the supported Bluetooth codecs (e.g. SBC) to ensure a stable connection.
Yes, it also works with the Ipad (we went on holiday that way), regardless of the medium. It even works with a USB-C adapter on my Iphone 15.
The volume is always controlled for both headphones at the same time, i.e. you can't turn down one headphone.
No, that will not work. The CM403 is only made for audio transmission (jack plug). For video streaming you need an HDMI plug, something like Google ChromeCast.
Is the battery charged and is the switch in the correct position? If you follow the operating instructions, it should actually work.
https://www.manualslib.de/manual/1032603/Ugreen-Cm403.html
As we do not have an effective user experience with the product, we have forwarded your question to the community so that it can possibly be answered by another customer.
I use this adapter in the car as a receiver for my iPhones. Everything has worked perfectly so far. Now I have had to change my iPhone because the old one is no longer supported by several sites. With the new 16e, however, the interaction between phone and adapter seems to be difficult. When I press pause on the adapter, I get the message: "Bluetooth disconected". 2 seconds later: "Bluetooth conected" and the music starts playing again. If I press pause on the iPhone, the music remains paused, but the messages continue to appear until I press play again. Then the music continues.
Does anyone know the reason for this annoying behaviour? Or am I making a mistake in the settings?
You can connect the UGREEN CM403 to a plasma TV to Bluetooth headphones by using it in transmitter mode. Here's how:
1. Connect the CM403 to the TV's audio output (if it has a 3.5mm jack) using a 3.5mm cable.
2. Switch the CM403 to transmitter mode.
3. Turn on your Bluetooth headphones and put them in pairing mode.
4. The CM403 will automatically pair with the headphones, allowing you to stream audio from the TV to the headphones.
Ensure your TV has a compatible audio output for this setup.
The Ugreen CM403 can be used as a transmitter to send audio to a stereo system with a Bluetooth system. However, compatibility depends on the specific Bluetooth version and the supported audio codecs of the stereo system. The CM403 supports the AAC and SBC codecs, which offers a good chance of compatibility.
On the question of whether the signal can be received with another CM403: Yes, this is possible. You can use the CM403 as a transmitter and receive the signal with another CM403 in receiver mode. The circuit "Phones out => CM403 => Bluetooth => CM403 => Aux in" should work, as the CM403 can work both as a transmitter and as a receiver.
Yes, you can connect your older Sony headphones (TMR-RF855R) via Bluetooth to the Ugreen CM403 adapter and your Samsung TV (UE55DU7172UXXH). The Ugreen CM403 is a 2-in-1 Bluetooth adapter that functions as both a transmitter and receiver and is compatible with devices with a 3.5 mm AUX connection. You do not need an RCA-HDMI adapter as the CM403 works directly via the 3.5 mm connection. Note, however, that the CM403 is not compatible with AirPods Pro 2, but this should not be a problem with your Sony headphones.
The UGREEN CM403 Bluetooth Audio Adapter is compatible with analogue headphones such as the Sennheiser Momentum 2 to connect them to a mobile. Here are the details:
- The adapter supports connection via a 3.5mm AUX cable, which makes it possible to convert non-Bluetooth-enabled devices such as the Sennheiser Momentum 2 into Bluetooth-enabled devices.
- In receiver mode (RX), the adapter can be connected to the headphones to receive music or other audio signals from a mobile phone.
Thus, the UGREEN CM403 can be used to connect the Sennheiser Momentum 2 to a mobile phone.
The UGREEN CM403 Bluetooth Transmitter & Receiver is compatible with a wide range of devices, including older non-Bluetooth speakers like your Bose SoundDock 10.
Here’s how you can use it:
- Switch the CM403 to RX (Receiver) mode by sliding the mode switch to the RX position.
- Connect the 3.5mm audio cable from the CM403 to the auxiliary input of your Bose SoundDock 10.
- Turn on Bluetooth on your phone or other Bluetooth-enabled device, search for the CM403 (usually listed as "UGREEN -60300" or similar), and connect to it.
- Once connected, your phone will stream audio wirelessly to the Bose SoundDock 10 through the CM403.
This setup allows you to add Bluetooth functionality to your non-Bluetooth speaker, enabling wireless audio streaming.
Ugreen's "CM403 (Transmitter & Receiver)", which is a Bluetooth audio adapter, does not appear to be specifically designed to be compatible with Bang&Olufsen BeoPlay A8 or BeoSound 8.
For BeoSound 8, users have found it difficult to find Bluetooth adapters compatible with the 30-pin connector, as these adapters do not provide the data presence expected by the dock.
For BeoPlay A8, there is no specific mention in the available sources that the Ugreen CM403 adapter would be compatible.
It is recommended that you check directly with the Ugreen manufacturer or consult the product specifications for precise compatibility information.
