Best selling Battery accessories from Victron Energy
On this page you'll find a ranking of the best Victron Energy products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Victron Energy Shunt SHU500050100 Battery monitoring
The Victron Energy Shunt SHU500050100 is a high-quality accessory for battery monitoring that enables precise measurement of current flow in battery systems. With a maximum current of 500A and a voltage of 50mV, this shunt provides a reliable solution for monitoring and managing battery performance. It is particularly useful in applications where accurate monitoring of energy consumption and battery performance is required. The shunt is suitable for use in various battery systems and contributes to optimising energy efficiency. Its robust construction ensures a long lifespan and reliability, while the straightforward installation allows for quick integration into existing systems. The Victron Energy Shunt is therefore a valuable addition for anyone looking to effectively monitor their battery performance.
- Maximum current of 500A for precise measurements
- Voltage of 50mV for enhanced accuracy
- Robust construction for a long lifespan.
2. Victron Energy Cyrix-Li-Load CYR010120450 Battery monitoring
Cyrix Lithium BMS Battery Coupler
The Cyrix Battery Coupler is a high-performance microprocessor-controlled relay that can be used to protect Victron LiFePO4 batteries.
To prevent cell undervoltage, overvoltage, and overheating, all Victron LiFePO4 batteries feature an integrated cell balancing function. This function internally regulates the differences between the cells and informs the external BMS whether to disconnect or connect the charging or discharging process.
- Disconnecting the load in the event of imminent cell undervoltage
- Disconnecting or reducing the charging current in the event of imminent cell overvoltage, high temperature (>50°C), or low temperature (<0°C).
The core of this protection mechanism is the VE.Bus BMS or the Small BMS. However, the VE.Bus BMS can only directly instruct VE.Bus devices to interrupt charging or discharging. Other loads or chargers must be controlled externally. This also applies to the Small BMS, which cannot control VE.Bus devices.
To disconnect such loads or chargers, several Cyrix switches that can be controlled by the BMS are available.
The models differ in:
System voltage, load capacity, and whether a load or a charge should be controlled.
Here, Load is for controlling the load and Charge is for controlling the charge.
For more complex systems, it often makes sense to consult.
3. Victron Energy Argo
Similar to diode battery separation, FETs can simultaneously charge two or more batteries through an AC generator or a battery charger with a single output, without connecting the batteries to each other. Unlike diode battery separation, FET separation results in virtually no voltage loss. The voltage drop is less than 0.02 volts at low current and averages 0.1 volts at higher current levels.
4. Victron Energy BP 100
The Victron Battery-Protect BP-100 (MPN BPR000100400) disconnects the battery from the less important loads before it is completely discharged (which would damage it) or before it no longer has sufficient energy to start the engine, etc. The BP series also has an overvoltage protection which disconnects the load at 16V or 32V and protects it from damage. In addition, the BP series has overvoltage protection that shuts down the load at 16V or 32V battery voltage and prevents damage. The BP supports AGM, lead-acid, gel and lithium batteries.6 different switch-off thresholds can be setThe Battery Protect is very flexible and can be set to different switch-off voltages. The following cut-off thresholds can be activated on the device: 10.5V / 21V, 10V / 20V, 9.5V / 19V, 11.25V / 22.5V, 11.5V / 23V,11.8V 23.6VDIn addition, there are different reset thresholds that can be selected for most cut-off thresholds. This device is the right protection for your battery and ensures a maximum lifetime, because most voltage converters or charge controllers have an undervoltage protection, but this only intervenes at quite low values, which are usually in the range of 10.5V / 21V. The higher this switch-off threshold is, the more the battery is protected. The higher the cut-off threshold, the longer you will be able to enjoy your batteries, which are usually quite expensive. Selection of the cut-off thresholdDepending on the battery type, different minimum battery voltages apply that must be adhered to in order not to damage the battery.
5. Victron Energy Terminal block Victron for 6 CIP100200100 (1500 A)
The BusBar 6 CIP100400070 is a high-current busbar designed for a maximum of 6 mega fuses and 1500A current from Victron Energy. It provides a professional solution for consolidating multiple devices protected by mega fuses. Instead of connecting 6 individual cables, you only need to connect a single bus cable from the bar to the DC power source(s). The BusBar 6 is optimally designed for use with the modular Mega-Fuse holder, which can be easily and securely connected with any number of other modular Mega fuse holders as needed. The connected holders can then be connected to a common DC power source via the high-current busbar. Currents of up to 1500A can be safely and professionally managed with this system.
Key features of the BusBar 6 CIP100400070:
- Compatible with all mega fuses
- Compatible with the modular mega fuse holder
- Space for up to 6 fuses
- Secure screw connection to the busbar for maximum safety
- Maximum current of 1500A
- 2 M10 connections for the DC power source(s)
- Saves you from connecting too many DC cables to the battery, where space is often limited
Compatible accessories:
- Mega fuse fuses 32V 60A – 300A
- Mega fuse fuses 58V 125 – 500A
- Modular fuse holder for mega fuses
Delivery includes:
1x Victron CIP100400070 BusBar 6 high-current busbar including the necessary screws.
6. Victron Energy BCD 402 Battery coupler, 2 batteries 40A
Argo Diode Battery Coupler
Diode battery couplers are used to provide continuous DC power to supply critical equipment, such as an electronic engine control system. Using a diode battery coupler, two or more DC sources can be connected in parallel to supply the necessary load. If one source fails, the supply to the necessary load is not interrupted.
7. Victron Energy Busbar Victron 250A 4P + cover
The busbar connecting rail reduces the amount of cabling required when mounting several modular fuse holders in parallel, thus simplifying installation.
8. Victron Energy RJ12 UTP BMV ASS030066100 Connecting cable
This Victron RJ12 UTP cable (MPN ASS030066100) is needed to connect a BMV shunt to the BMV monitor. Typically, an RJ12 cable is included with the BMV monitor, but if it is too short or too long, you can replace it with this cable.
Product features:
- Connector type: RJ12 on both ends
- Length: 10 meters
Delivery includes:
1x Victron RJ12 UTP cable 10m.
9. Victron Energy Smart Battery Protect 12/24V--220A BPR122022000 Battery Isolator
The Victron Battery-Protect BP-220 disconnects the battery from less important consumers before it is fully discharged, which could cause damage, or before it no longer has enough energy to start the engine. Additionally, the BP series features overvoltage protection, which disconnects the load at 16 V or 32 V battery voltage, safeguarding against damage. The BP supports AGM, lead-acid, gel, and lithium batteries.
Six different disconnect thresholds are adjustable. The Battery-Protect is highly flexible and can be set to various disconnect voltages. The following disconnect thresholds can be activated on the device: 10.5 V / 21 V, 10 V / 20 V, 9.5 V / 19 V, 11.25 V / 22.5 V, 11.5 V / 23 V, 11.8 V / 23.6 V. Additionally, there are different reconnection thresholds available for most disconnect thresholds. This makes the device the perfect protection for your battery, ensuring maximum lifespan, as most voltage converters or charge controllers do have undervoltage protection, but this typically activates at quite low values, usually around 10.5 V / 21 V. The higher the disconnect threshold, the longer you will enjoy your batteries, which are generally quite costly.
The selection of the disconnect threshold depends on the battery type, as different minimum battery voltages must be adhered to in order to avoid damaging the battery.
Battery accessories
EUR103,12
Victron Energy Smart Battery Protect 12/24V--220A BPR122022000 Battery Isolator
10. Victron Energy Smart Battery Protect 48V-100A BPR110048000 Battery Isolator
The Victron Energy Smart BatteryProtect 48/100 provides solid battery protection for 48 V batteries of various types. Compared to the previous version, the Smart version features an integrated Bluetooth module that connects the Smart BatteryProtect (SBP 48/100) to a smartphone or tablet. This allows you to program all necessary on and off thresholds or select the appropriate value from 9 predefined thresholds. The BatteryProtect 48/100 can also be used as a charge interrupter between a battery charger and a lithium battery. A wide operating voltage range of 24 - 70 V makes the device universally applicable. The ability to connect an external switch or alarm to the BatteryProtect makes the SBP 48/100 Smart the perfect battery guardian.
Key features of the Smart BatteryProtect 48/100:
- 100 A maximum switching capacity
- For 48 V batteries with automatic detection of the battery bank's voltage range
- Explosion protection through integrated MOSFET switches that replace relays, reducing the risk of sparking to zero
- Integrated Bluetooth module, optionally switchable
- Freely programmable on and off thresholds, easily and wirelessly via the VictronConnect app
- Alternative programming and status display of settings via a seven-segment display
- Integrated alarm output, with 9 predefined thresholds selectable at the alarm output.
Battery accessories
EUR181,61
Victron Energy Smart Battery Protect 48V-100A BPR110048000 Battery Isolator