Circular bores with clean, almost burr-free hole edges. Constantly increasing core diameter in the direction of the shank for maximum breakage stability in freehand use (from Ø 4.8 mm). Iron oxide alloy effectively protects against overheating. Anti-slip shank with three milled clamping surfaces prevents the drill from spinning in the chuck (from Ø 5.0 mm). The extreme 2" center point allows pinpoint drilling without running off, and specially ground shoulder cutting edges mill exact, circular holes with clean edges (from Ø 4.8 mm). Start immediately when setting; no more center punching is necessary. Up to 50% increased breakage stability. Abrasion-proof size markings, placed outside the clamping area, ensure permanently good legibility (from Ø 5.0 mm).

The extreme 2 is the specialist for freehand drilling in thin-walled materials. Circular drilling with clean, virtually burr-free hole edges. Iron oxide alloy effectively protects against overheating. The anti-slip shaft with three milled clamping surfaces prevents the drill from spinning in the chuck (from Ø 5.0 mm). Up to 50% increased breaking strength. The extreme DEWALT 2 center point enables pinpoint drilling without running off, and specially ground shoulder cutting edges mill exact, circular holes with clean edges (from Ø 4.8 mm).

Application examples: For use in alloyed and unalloyed steels up to 900 N/mm² tensile strength. Suitable for drilling sheet metal and thin-walled profiled materials (as well as tubes without pre-graining) where exact and clean holes are required. Also very suitable for drilling wood and plastics.