Consultancy mandate Three flats are to be fitted with Aqara switches. With this mandate, you represent the client vis-à-vis the existing electrical planner and installer.

  0

Good day to you all, I was wondering if anyone knows anything more about this. I have now bought the switch module from Phillips Hue, but it is not possible to feed direct current into it, the thing works by battery. But this is a problem for me because I wanted to use illuminated switches or buttons from Feller, which depend on direct current so that they are illuminated. I have seen that there is a Zigfred Uno (https://www.digitec.ch/de/product/zigfred-uno-komplett-set-lichtschalter-storenschalter-17252894) that should still be able to light up, or I would have to install a dimming actuator (https://www.brack.ch/sunricher-...) together with an illuminated Feller button (https://www.digitec.ch/de/s1/product/feller-ediziodue-taster-beleuchtet-lichtschalter-storenschalter-6058386?supplier=406802), but I don't know if the switch will actually still light up. Does anyone else have any ideas on how this could be done better? With kind regards, Christoph

  2

I am looking for a 3-way socket (preferably flush-mounted) where I can switch on each of the 3 sockets separately. Neutral and earth are the same for all three, but I want to be able to switch on the phase separately. Is there such a socket?

  2

Would be handy if you could filter by transmission type (Z-Wave Zigbee).

  0