Danfoss Heating Mat DTCE-300 1760W

Manufacturer: Danfoss
Designation: Heating Mat 400V
Type: DTCE-300 1760W
With Carrier Mat: No
Heating Cable Fixation: Glued
Self-Adhesive: No
Connection Power: 1760 W
Power: 300 W/m²
Heating Cable Load: 30 W/m
Number of Cold Leads: 1
Length of Cold Leads: 10000 mm
Suitable for Wet Rooms: Yes
Suitable as Outdoor Heating: Yes
Suitable as Roof Heating: No
Area: 5.9 m²
Length: 11800 mm
Width: 500 mm
Thickness: 7 mm
With Controller: No
With Room Thermostat: No
With Floor Temperature Sensor: No

Danfoss Heating Mat DTCE-300 1760W: Additional Details
Ready-to-install heating mat with a connection cable suitable for installation in reinforced concrete, screed, or sand bed. Includes additional protective sheathing for the use of an RCD (Residual Current Device). This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is not required. Includes factory-installed waterproof connectors and a 10 m long cold lead, to be installed according to the installation instructions. Measurement of insulation and total resistance. Heating cable according to IEC 60800, Voltage: 400 V, Rated Limit Temperature: 80°C, Specific Heating Power: 300 W/m², Resistance Tolerance: +10% / -5%, Minimum Installation Temperature: 5°C, Minimum Bending Radius: 5 x dA, Protection Class: IP X7, Area 5.9 m², 1760 W.