Devi Heating Mat for Concrete DEVIsnow 300 2850W

Manufacturer: Devi
Description: Heating mat for concrete 400V 9.8 sqm, 2850 W
Type: DEVIsnow 300 2850W
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection power: 2850 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Number of cold conductors: 1
Length of cold conductor: 30000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 9.8 m²
Length: 13000 mm
Width: 750 mm
Thickness: 7.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The Devi Heating Mat for Concrete DEVIsnow 300 2850W is a ready-to-install heating mat with a connection cable, suitable for installation in reinforced concrete, screed, or sand beds. It features an additional protective sheath for the use of RCD protection. This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is not required.

Including factory-installed waterproof connectors and a 30 m long cold conductor, to be installed according to the installation instructions. Measurement of insulation and total resistances. Heating cable according to IEC 60800, voltage: 400 V, rated limit temperature: 80 °C, specific heating output: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5 °C, minimum bending radius: 5 x dA, protection class: IP X7, area 9.8 m², 2890 W.