Danfoss Heating Mat DTCE-300 2630W

Manufacturer: Danfoss
Description: Heating mat 400V
Type: DTCE-300 2630W
With carrier mat: no
Fixation of heating conductor: glued
Self-adhesive: no
Connection power: 2630 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Number of cold leads: 1
Length of cold leads: 10000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 8.25 m²
Length: 11000 mm
Width: 750 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Danfoss Heating Mat DTCE-300 2630W: additional details
Ready-to-install heating mat with a connection cable suitable for installation in reinforced concrete, screed, or sand bed. With additional protective sheath for use with RCD protection. This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is not necessary. Including factory-installed waterproof connectors and a 10 m long cold lead, to be laid according to the installation instructions. Measurement of insulation and total resistance. Heating cable according to IEC 60800, voltage: 400 V, rated limit temperature: 80°C, specific heating output: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area 8.3 m², 2630 W.