Devi Heating mat for asphalt paving DEVIasphalt 300 2300 Manufacturer :Devi Designation :Heating mat for asphalt paving. Asphalt installation 7,9qm, 2300W Type :DEVIasphalt 300 2300 With carrier mat :yes Fixation of the heating conductor :Glued Self-adhesive :no Connected load :-2300 W Output :300 W/m² Heating conductor load :30 W/m Number of PTC thermistors :1 Length of PTC thermistors :30000 mm Suitable for damp rooms :yes Suitable as outdoor heating :yes Suitable as roof heating :no Area :7.9 m² Length :15800 mm Width :500 mm Thickness :8 mm With controller :no With room thermostat :no With floor temperature sensor :no Devi heating mat f. Asphalt installation DEVIasphalt 300 2300: more details Ready-to-install heating mat with one connection cable, suitable for embedding in asphalt pavements. The heating cable fulfils the requirements of IEC 60800 and EN 62395. With additional protective braiding for the use of the residual current circuit breaker. Including factory-fitted watertight sleeve and a 30 m long PTC resistor. Voltage: 400 V, nominal limit temperature: 90°C, installation temperature: 240°C for short periods, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: FEP, PTC resistor: 1 x 30 m 2.5 mm², specific heat output: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, area: 7.9 m², 0.50 x 15.80 m, 2285 W , EAN: 5703466229088.