The cooling performance is amazingly good... My OC i5 is permanently at 40 degrees at full load and in "standard mode". If you set the cooling to performance in NZXT's CAM software, it comes down even further.

According to our information, it should be included in the scope of delivery. If this is not the case, you can always contact the manufacturer directly to have it delivered.

Yes, the NZXT Kraken X53 water cooler is compatible with the AMD Ryzen 7 5900X processor. The Kraken X53 supports the AM4 socket on which the Ryzen 7 5900X is based and is suitable for a wide range of AMD and Intel processors. Before installing the cooler, however, you should ensure that your computer's case offers sufficient space and that the cooler does not collide with other components

Suitable, perhaps. You just have to see if the cooler supports Intel's Socket 1700. But it doesn't make sense. The i9 13900K can take up to 253W. This cooler is already loud on my 5800X3D with 88 Watt limit.

A bracket required for the 12th generation Intel processors is not included, but can be ordered directly from the manufacturer. This process is free for anyone who has already purchased a cooler from NZXT. You should allow 2-3 weeks for delivery to Switzerland. More detailed information can be found on the manufacturer's website: https://support.nzxt.com/hc/en-us/articles/4407896253339-How-to-get-the-LGA-1700-Bracket

Yes (except for the fans, which you still have to screw on yourself, but are of course included).

No, probably still not at the moment. However, NZXT will provide you with the mounting kit free of charge. Simply open a support ticket with NZXT. As described here: https://support.nzxt.com/hc/en-us/articles/4407896253339-How-to-get-the-LGA-1700-Bracket

No, with this one it is only the NZXT logo, unfortunately no LCD display. For this you need the Z series. NZXT Kraken Z63 (5.60 cm)

Es ist ab sofort hier bestellbar: NZXT NZXT KRAKEN Z53 RGB White Komplett-Wasserkhlung RL-KRZ53-RW retail

They probably won't be here for a few weeks: https://support.nzxt.com/hc/en-us/articles/4408959959451-Will-NZXT-Provide-a-LGA-1700-Bracket-

It will probably be a bit tight; if I see it correctly in the photos, the enclosure only has room for one fan at the top and one and a half at the front. But the cooler needs space for 2 fans (240mm). I have installed the fan in the Corsair 4000D Airflow. The case is a little more expensive, but has more space and thus more cooling options.

I would recommend a pull configuration for front mounting if it is not visually disturbing, as it is then much easier to clean the radiator. The dust will settle on the front and if you don't have to take off the fans to remove the dust again, it's really nice. In terms of performance, it will hardly make a difference.

Yes, that's not a problem. Behind the front of the case there is space for a 280mm radiator (60mm high), which means that the Kraken X63 would also fit in.

Yes with the NZXT Cam software

Good day I have the same water cooling for the i9 9900k and the cpu is always nice and cool. Would say it goes well

Yes, that is possible. However, one should be aware that the radiator mounted in the lid partially covers the rear fan. High RAM heat sinks can also make installation more difficult. I would therefore recommend mounting the radiator in the front of the case if possible. For this, only the hard drive cage has to be removed. The cooling capacity is easily sufficient for a 3700X.

According to the data sheet 400mm.

Yes, that's not true... You can find more precise data on the NZXT website. The height of the fan should be 2.6 cm + the radiator is 3 cm high.

The radiator should definitely fit in combination with the Corsair Vengeance LPX low profile RAM sticks. Cooling performance is more than sufficient, cools my i7 8700k overclocked to 5Ghz satisfactorily.

Yes, the water pump is coated with a thin layer of thermal paste.

No, you can only display this NZXT logo and the ring in different colours... Patterns and effects are also possible. For example, you can display the temperature with colours. The NZXT Z.... models have a display where you can show everything on it.

Yes, all parts are included.

Yes, everything is there for AM4.

Yes, it is a 240mm.

Hello, yes, it is compatible.

Yes.

Lian Li TU150 black, NZXT 510 black and NZXT 710 black