Square decorative LED surface-mounted light for wall and ceiling installation. The wall light harmonizes with other fixtures that can be used in the project through its optical and technical design features. It is also suitable for use within the building. Surface-mounted lights for ceiling and wall installation. With Lambertian light intensity distribution. The LED system forms a permanently connected unit with the light cover and can be replaced. LED system with adjustable luminous flux and adjustable light color via DIP switch. Rated luminous flux 1210 lm - 1300 lm, rated power 17.00 W, maximum luminous efficacy 76 lm/W. Selectable color temperature: 3000 / 4000 K, general color rendering index (CRI) Ra > 80. Color point tolerance (initial MacAdam) = 4 SDCM. Average rated lifespan L80(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with eco-design requirements. Housing made of aluminum die-cast. Cover made of highly impact-resistant PMMA, opal. Color anthracite, similar to DB703 with metallic effect, highly weather-resistant, powder-coated. Dimensions (L x W): 260 mm x 260 mm, height of the fixture 72 mm. Protection class (EN 61140): I, protection rating (DIN EN 60529): IP65, impact resistance grade according to IEC 62262: IK10. Weight: 2.1 kg. With 5-pole terminal block up to 2.5 mm² for mains connection and network forwarding. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard. The fixture is suitable for operation on a 230V DC network. The control gear is replaceable in accordance with eco-design requirements. Surge voltage resistance Differential Mode / Common Mode: 1 kV / 2 kV. The product meets the fundamental requirements of applicable EU directives and the Product Safety Act and bears the CE marking.