Round, decorative LED surface-mounted light for wall and ceiling installation with protection class IP65. The wall light harmonizes with other lights used in the project through its optical and technical design features. It can also be used comprehensively within the building's interior. Surface-mounted lights for ceiling and wall installation. With Lambertian light intensity distribution. The LED system forms a permanently connected unit with the light cover and can be replaced. LED system with adjustable luminous flux and adjustable light color via DIP switch. Rated luminous flux 1700 lm - 1800 lm, rated power 18.00 W - 0.00 W, maximum luminous efficacy 100 lm/W. Selectable color temperature: 3000 / 4000 K, general color rendering index (CRI) Ra > 85. Color point tolerance (initial MacAdam) = 4 SDCM. Average rated lifespan L80(tq 25 °C) = 50,000 h. The light source is replaceable according to eco-design requirements. Light body made of aluminum die-cast. Cover made of highly impact-resistant PMMA, opal. Surface coated in white (RAL 9010). Light diameter 265 mm, light height 75 mm. Protection class (EN 61140): I, protection rating (DIN EN 60529): IP65, protection rating for lamp compartment: IP65, impact resistance grade according to IEC 62262: IK10. Weight: 1.8 kg. With 5-pole terminal block up to 2.5 mm² for mains connection and network forwarding. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The luminaire is suitable for operation on a 230V DC power supply. The control gear is replaceable according to eco-design requirements. The LED system with control gear is suitable for operation on DC power supplies. Surge voltage resistance Differential Mode / Common Mode: 1 kV / 2 kV. The product meets the basic requirements of applicable EU directives and the Product Safety Act and bears the CE marking.