Square decorative LED surface-mounted light for wall and ceiling installation. The wall light harmonizes with other fixtures used in the project through its optical and technical design features. It can be used holistically within the building's interior. Surface-mounted lights for ceiling and wall installation. With Lambertian light intensity distribution. The LED system forms a permanently connected unit with the light cover and can be replaced. LED system with adjustable luminous flux and adjustable light color via DIP switches. Rated luminous flux 910 lm - 1450 lm, rated power 9.00 W - 13.00 W, maximum luminous efficacy 112 lm/W. Selectable color temperature: 3000 / 4000 K, general color rendering index (CRI) Ra > 80. Color tolerance (initial MacAdam) = 4 SDCM. Average rated lifespan L80(tq 25 °C) = 100,000 h. The light source is replaceable according to eco-design requirements. Housing made of aluminum die-cast. Cover made of highly impact-resistant PMMA, opal. Color anthracite, similar to DB703 with a metallic effect, highly weather-resistant, powder-coated. Dimensions (L x W): 402 mm x 402 mm, height of the fixture 72 mm. Protection class (EN 61140): I, protection rating (DIN EN 60529): IP65, impact resistance grade according to IEC 62262: IK10. Weight: 4.0 kg. With 3-pole terminal block up to 2.5 mm² for mains connection and power forwarding. With electronic control gear, switchable. The control gear is replaceable according to eco-design requirements. Surge voltage withstand capability Differential Mode / Common Mode: 1 kV / 2 kV. The product meets the essential requirements of applicable EU directives and the Product Safety Act and bears the CE marking.